Difference between revisions of "Msc3G5:Schedule"

Revision as of 20:09, 26 October 2014

LECTURE 1.0 0 MONDAY 13th OCTOBER | 16:00 HRS | PROTOSPACE

Printing outside the box! | Tim Geurtjens | Joris Laarman Lab

Joris Laarman LAB is using 3D-printing techniques in most of their project. Sometimes just as a design tool, but increasingly also for actual functional prototypes. Frustration about the absurd high cost of 3D-printing and the lack of large enough building volumes led them to the development of the MX3D-program. MX3D stands for Multi Axis 3D Printing. By combining Industrial robots with different printing tools, they can now print large structures in many materials such as thermoset plastics or even Stainless steel and Aluminium.

BIO | After study mechanical engineering, Tim Geurtjens (1976) attended the Design Academy Eindhoven in 2003 where he graduated 4 years later. Since then he has been working as CTO for Joris Laarman Lab, best known for its experimental designs inspired by upcoming technology. Over the last 6 years he developed extensive knowledge of exotic materials and cutting edge technologies, specifically novel digital fabrication methods.

Tim is co-founder of MX3D, a company that developed several large-scale 3D printers that use 6-axis industrial robots. These printers allow them to print very large structures in many different materials such as thermoset plastics, stainless steel or aluminium.

Critical and Clinical Cartographies 0 Two-day International Conference | 13th & 14th NOVEMBER

The critical […] and the clinical […] may be destined to enter into a new relationship of mutual learning. […] In place of a dialectic which all too readily perceives the link between opposites, we should aim for a critical and clinical appraisal able to reveal the truly differential mechanisms as well as the artistic originalities. (Deleuze, 1967)

Host

Theory Section and Hyperbody, Department of Architecture, Faculty of Architecture and the Built Environment, TU Delft, The Netherlands

Organising Committee

Heidi Sohn, Henriette Bier, Andrej Radman, Stavros Kousoulas and Jasper Schaap.

Location

Day One: Legermuseum, Korte Geer 1,Delft.

Day Two: Berlagezaal, Faculty of Architecture and the Built Environment, Julianalaan 134, Delft.

Speakers

Jenny Dankelman, Christian Girard, Arie Graafland, Keith Evan Green, N. Katherine Hayles, Frans C. T. van der Helm, Kas Oosterhuis, Antoine Picon, Rachel Prentice and Sjoerd van Tuinen.

OUTLINE | The conference on Embodiment and Technology and Care and Design is organised by the Theory Section and Hyperbody of the TU Delft Architecture Department, in cooperation with Industrial Design Designing Health Research programme, and the Bio Mechatronics and Bio Robotics Section of the Department of Bio Mechanical Engineering, TU Delft.

What we will be exploring is the relation between the human body as an organism and the machine technologies used in medical care. In other words we will engage in the practice of cartography in order to map the ever-shifting thresholds between the organic and the inorganic, the innate and the acquired. In short, a condition “that is no wider than what it conditions, that changes itself with the conditioned and determines itself in each case along with what it determines.” This is the cornerstone of the Deleuzian concept of plasticity.

Medical knowledge has advanced rapidly over the past century and it continues to progress at an unprecedented speed. The developments in the medical sciences relate to the more theoretical discourses on ‘man and nature’ in the (new) humanities at large. The two terms are not as innocent as they might seem and we propose to approach them both critically and clinically. The encounter comes under the aspects of symptomatology or the study of signs, etiology or the search for causes, and therapy or the development and application of treatment.

While etiology and therapeutics are integral parts of medicine, symptomatology could be said to belong as much to design as it does to medicine. The task of the designer is to produce ‘pre-medical’ variation on the one hand and to select and synthesize ‘sub-medical’ variants on the other so that she may participate in the construction of new possibilities of life. A new mode of existence entails making life something more than personal and liberating it from what imprisons it. This is the question of health.

The four panels during the two days will provide for different points of entry to the problem of the body and its milieux.

LECTURE 2.0 0 MONDAY 17th NOVEMBER | 11:00 HRS | PROTOSPACE

From materials engineering to the computational development of architectured materials

Justin Dirrenberger | Department of Engineering Materials at CNAM, Paris

The classical engineering material-by-design approach has been extensively perfected by materials scientists, while engineers have been optimising structures geometrically for centuries. The purpose of architectured materials is to build bridges accross the microscale of materials and the macroscale of engineering structures, to put some geometry in the microstructure. This is a paradigm shift. Materials cannot be considered monolithic anymore. Any set of materials functions, even antagonistic ones, can be envisaged in the future. The development of architectured materials is involving materials scientists, metallurgists, chemists, physicists, mechanicians and engineers, but also biologists, computer scientists, architects, designers, mathematicians, plasticians, etc. In this presentation, we intend to demonstrate the necessity of computational means for developing architectured materials, especially using virtual material design, topology optimization and so-called "computational experiments".

BIO | Justin Dirrenberger is a materials scientist and Associate Professor of metallurgy at CNAM in Paris. In 2012, he completed a PhD thesis on the mechanics of architectured materials at Ecole des Mines de Paris. In 2013, he collaborated with EZCT Architecture & Design Research for Archilab, as a materials processing and structural engineering consultant. Recently, he initiated a graduate program on materials & additive manufacturing in Paris, open to both engineering and architecture students. He is leading the DEMOCRITE research project, funded by heSam Université, between CNAM, Arts et Métiers-ParisTech, ENSA Paris-Malaquais, ENSCI-Les Ateliers, and INRIA, aiming at developing additive manufacturing at the architectural scale. His research interests are related to the morphological structures of matter at different scales within materials. He is particularly involved in the design, modelling, simulation, optimisation, and processing of architectured materials, which result from the unholy alliance between metallurgy, mechanics, and geometry.